Yocan Torch – Vape Vitals
Manufacturer Yocan Technology Co.
Style Portable
Charging Time 3-4 Hours
Warranty 6 Month
MSRP $79.00

Brief Overview

The Yocan Torch is a portable dual coil quartz personal device that makes dabbing easy and less stressful than ever before. Multiple options on how you want to dab, an airflow button for the amount you want to take in, a quartz dual coil. All of this combined makes it the ultimate tool for your everyday wax use.

Charging

A: 3-4 Hours.
A: To do that, plug the micro USB into the battery, then plug the USB into a computer or wall adapter.
A: The LED indicator on the Yocan Torch is located next to the charger input on the battery. The LED will light up red when charging and will turn off once fully charged.

Temperature

A: You do not need to set the temperature, the Torch will heat up to its max temperature in seconds once the button is pressed.
A: The Torch heats up instantly.

Usage

A: First assure your Yocan Torch is fully charged. To do that, charge via USB provided. The charging port is located on the front of the battery. The LED indicator on the Yocan Torch is located on the top of the battery. The charging time is about 1.5-2.5 hour with a wall adapter.

Pull out the metal tube and screw off the coil cap. With the loading tool apply your concentrates onto the dual coil. (a grain of rice sized amount works best) Assemble the Yocan Torch. Attach the Yocan Torch to your glassware(fits for 14mm & 18mm ground glass joints, you can use the male or female attachment).

Press the button at the top of the battery five times to turn the unit on. The power symbol (LED) will flash white three times to indicate that the unit is on and the battery will be in standby mode. Once in standby mode, To start the device press the button one time and you will see the power symbol light up white for 15 seconds. The temperature of the quartz dual coils during use is 482F-536F) you can expect 45 puffs on a fully charged battery. If you want a smoother, fuller hit press the airflow button and release it before you stop inhaling.

To pause your session press the power button with another 1 click and the white power symbol will go out. If you are finished with your session press the power button five times. The power symbol lights up white and flashes three times and the battery will be turned off.

A: Yes.
A: It’s best to not fill the heating chamber full. Just apply enough for one session at a time. The Torch was not designed to hold more than one session at a time.
A: Occasionally through use if using dry material, use caution not to make contact with the atomizer, you could damage it very easily.

Accessory

A: The Torch atomizers are not rebuildable, you can replace them very easily by disconnecting them from the unit, and replace with a fresh atomizer coil.

On average, atomizer coils last 4-5 weeks of normal use; your experience will vary.

A: No it does not.

Common Product Issues

A: Yes it will shut off after 10 seconds of being engaged.

Cleaning & Maintenance

A: Within the crucible of your Torch tank, the coil works to clean itself by clearing off any residue that comes in contact with it. We don’t recommend using any type of liquid cleaning agent in the Torch tank, as doing so could cause it to malfunction.
A: Within the crucible of your Torch atomizer, the coil works to clean itself by clearing off any residue that comes in contact with it. We don’t recommend using any type of liquid cleaning agent in the Torch crucible, as doing so could cause the atomizer to malfunction. If you need to remove dry material from the crucible, we don’t recommend it.
A: On certain parts alcohol is fine. The top cap will incur the most buildup, soaking it in alcohol or cleaning with alcohol soaked cotton swab are effective cleaning methods.

Cleaning the atomizer is not recommended, replace as needed.

Make sure you don’t expose the atomizer or battery to any liquids whatsoever. If you need to clean the outside of the Torch, use a warm damp cloth. If the Torch gets wet in any way, allow to dry in the sun or a warm dry area until COMPLETELY DRY. Attempting to use the Torch if wet will cause serious damage to the unit.

A: The top cap will incur the most buildup, soaking it in alcohol or cleaning with alcohol soaked cotton swab are effective cleaning methods. Make sure you don’t expose the atomizer or battery to any liquids whatsoever.

Ordering / Returns / Warranty

A: VapeWorld handles all Yocan warranties for units purchased directly from VapeWorld or through a Brick and Mortar store that VapeWorld supplies.

6 Months on battery.

If purchased elsewhere, the customer should contact Yocan directly using the information below:
Email: service@yocantech.com

Product Weight 0.604067 LB
Charging Option USB
Battery Type 3.7 V 650mAh Li-Ion Polymer
Battery Style Barrel
Battery Capacity 650 mAh
Replaceable Battery No
Recharge Time 3-4 Hours
Tank Style Quartz Dual Coil
Tank Capacity One Session
Tank Material Stainless Steel
Heating Element Quartz Dual Coil
Warm-Up Time ~ 1 Second
Vapor Path Stainless Steel
Vapor Delivery Method Direct Draw

Yocan Torch

The Yocan Torch has an excellent finish available in Black & Silver.

Getting the Most Out of Your Yocan Torch

  • Drawing after the heater has cooled down will allow the air vents to stay free of blockage.
  • Never leave a Torch in a hot car. Ever.
  • Allowing the Torch to freeze can damage the atomizer. Avoid temperatures below 40 degrees.
  • Use caution with the included tool, as it could damage the atomizer coil if you aren’t careful.
  • Overloading more than one session’s worth of concentrate is a potential recipe for mess.

Need Assistance with your Yocan Torch?

Try these Solutions to common issues:

A: A few things could be causing this. Is the 5-click safety lock in place? Try clicking your Torch button five times and see if anything happens.

Are you getting any light at all from the button? If not, make sure that its charged properly. This seems obvious, until you realize the power strip you were plugged into wasn’t turned on. Or…the USB port you were plugged into wasn’t actually a powered USB port. Or…there are many reasons to think your vaporizer is charging…when it isn’t. It happens all the time.

If you have charged it fully, and unlocked the power button, and are still getting no vapors, remove the mouthpiece, press the button, and see if the atomizer is at least getting warm?

If you have no activity from a fully charged Torch, it’s possible that your atomizer has died. We’ll have replacement atomizers available.

A: Make sure your Torch is fully charged, and the atomizer coil is fully seated and loaded properly (not overloaded).
A: If this occurs, allow the Torch to heat up for five seconds, and try to draw, this should allow the blockage to free itself.

As you continue to use the Torch, be mindful of this blockage potential. One trick to prevent it from happening is to continue to draw through through the Torch once a minute as it is cooling. Once all the internals have cooled to room temperature, you can stop.

Warranty Contact

VapeWorld handles all Yocan warranties for units purchased directly from VapeWorld or through a Brick and Mortar store that VapeWorld supplies.

If purchased elsewhere, the customer should contact Yocan directly using the information below:

Email: service@yocantech.com

Leave a Reply