vaporx-logo

 VaporX XRT – Vape Vitals
Manufacturer VaporX
Tank Style Skillet
Method Direct Draw
Threading 601
Battery Li-Ion 650mAh
Warranty 30 Day
Replacement Coils Coming Soon
MSRP 129.95
 
 
 

vx-xrt-vapeworld-kb-main-image

Brief Overview

The XRT is an incredibly sleek and versatile portable vaporizer designed for use with aromatic blends, liquid and solid concentrates. The user-friendly features include one-touch activation, a 6-click battery lock, and an easy loading system. The XRT comes in a compact and stylish form that provides a high-quality vapor experience in a very portable package.

See User Guides below for full usage information.

Using Your XRT

A: We definitely recommend reading the full instructions located on the ‘User Guide’ tab, but here is a quick rundown on XRT Usage:

Charge the XRT – This could take a few hours the first time, but subsequent charges should not take longer than 46-60 minutes.

Load the XRT – This is easily done by removing the mouthpiece, and using a loading tool to apply your solid concentrates on top of the atomizer coil. Do not load too much, more than a sessions worth is definitely too much. Replace mouthpiece.

Power up and Draw – If the switch on the XRT is locked, unlock by pressing the button 6 times. This enables the power switch and the XRT is ready to use. Press the button and immediately begin drawing from the XRT. Use until you have had your fill, or the ten-second shut off turns the atomizer off.

A: 1 Second
A: When using solid concentrates, its vital that you only use that which melts cleanly and leaves no particulate behind. This particulate can overheat when in contact with the atomizer coil, shortening its lifespan.

Varying your draw rate slightly will allow you to adjust the density of the vapor output, slower draws will create thicker vapors, and quicker draws will create slightly thinner vapors.

The air intake on the XRT is controlled, so there is only a small amount of adjustment you can make to your draw rate.

A: The XRT was designed mainly for aromatic blends and solid concentrates. It also comes with a liquid compartment add on.
A: Yes. The AC adapter for the USB charging cable is rated from 100v to 240v, however you may need an outlet adapter for locations outside of North America.

USB Charging is also available.

A: When using solid concentrates its vital that you only use that which melts cleanly and leaves no particulate behind. This particulate can turn into carbon when in contact with the atomizer coil, shortening its lifespan.

Varying your draw rate slightly will allow you to adjust the density of the vapor output, slower draws will create thicker vapors, and quicker draws will create slightly thinner vapors.

The air intake on the XRT is controlled, so there is only a small amount of adjustment you can make to your draw rate.

A: The atomizer coil is NiChrome, the crucible is ceramic, and the mouthpiece is silicone.
A: Nichrome. Nichrome is a non-magnetic alloy of nickel, chromium, and often iron, usually used as a resistance wire in applications from atomizer coils to toasters and beyond.
A: Overheating is definitely possible. The XRT may heat aromatic blends past the point of vaporization. Please call a VapeWorld representative for more information.
A: With solid concentrates, we don’t recommend loading more than one sessions worth.

With aromatic blends, you can load as much as you can fit in the chamber, as long as you don’t load it too tightly.

A: Inspect your blends as you use the XRT, the color will dictate the need for stirring. Most blends will turn a light to dark brown after being vaporized, darker than dark brown is definitely approaching or exceeding over-heating.

If, after the first few times you stir your blends, you find that the blend seems to be browning evenly, you are loading it properly, and may not need to stir.

If you are finding that your blend is browning unevenly, trying loading it *slightly* more loosely.

A: Yes the XRT will shut off after 10 seconds. As a general safety rule, do not leave the XRT unattended while powered on.
A: The atomizer coil is not rebuildable, so when it eventually expires, replace with a new one.

Atomizers will last 4-5 weeks with normal use, your experience may vary.

A: There are no screens in the XRT.
A: Li-Ion, 650mAh with 601 threading.
A: The AC adapter for the USB charging cable is rated from 100v to 240v, however you may need an outlet adapter for locations outside of North America.

USB Charging is also available.

Cleaning & Maintenance

A: Always allow the XRT to cool COMPLETELY before cleaning, 30 minutes should be sufficient.

Use the included brush/tool to clean inside the crucible, but be EXTREMELY careful not to make contact with the atomizer coil, it can be damaged very easily.

Any solid concentrate that has collected on the outside of the XRT can be cleaned with a warm, damp washcloth.

The mouthpiece and top section of the body that unscrews will incur the most buildup, especially with the use of solid concentrates. This can be cleaned by soaking in isopropyl alcohol.

Always make sure your vaporizer is COMPLETELY dry before plugging it back in.

Do not attempt any internal or external repairs to your unit as doing so may cause fatal injury – or worse – void your warranty! (Please contact us if you feel something is wrong with your vaporizer.)

A: Inspect your XRT each time you use it. Make sure the coil is working perfectly, and that no debris or buildup is clogging the holes. Check the inside of the mouthpiece often, it will get dirty the fastest.

Atomizers will last 4-5 weeks with normal use. Your experience will vary, replace as needed.

A: Only on the mouthpiece, and the top metal section that unscrews. Do not use liquids to clean the atomizer coil.
A: The mouthpiece, and the top metal section that unscrews. Check these often
A: The atomizer is replaceable. Atomizers will last 4-5 weeks with normal use, however your experience will vary.
A: Only use the tool/brush included with the XRT.

Ordering – Returns – Warranty

A: 30 Day
A: Not at this time.
A:

VaporX XRT 30 Day Warranty

Vapor Corp. is handling all of the warranty requests and service for the VaporX XRT.

  • vapor-corp.com/register

VaporX warrants our products to be free from defects in materials and workmanship for 30 Days from the date of purchase under proper use. Warranty excludes cartridges, misuse or abuse, and any accidental damages.

*IMPORTANT: WARRANTIES NON-TRANSFERABLE. ITEMS PURCHASED ONLINE FROM E-BAY, AMAZON, CRAIGSLIST, ETC. ARE CONSIDERED 2ND HAND AND WARRANTIES NULL AND VOID!

If you need more information about XRT’s Warranty, please contact us

A: Your warranty begins on your purchase date, if you have any questions about your XRT warranty, please contact us.

If you have any other questions about the XRT vaporizer, please contact us!

Product Dimensions 5.12in x 0.5in x 0.5in (12.9cm x 1.27cm x 1.27cm)
Package Dimensions 5.25in x 3.25in x 2.25in (14.4cm x 5.1cm x 4.6cm)
Product Weight 0.1 lbs (.05kg)
Package Weight .3lbs (.14kg)
SKillet Material Ceramic Crucible/Nichrome Coil
Tank Capacity One Session
Charging Options USB/110v/240v
Battery Type 601
Replaceable Battery Yes
Battery Capacity Li-Ion 650 mAh
Auto-Off? Yes, 10 Second
Safety Power Switch Yes, 6-Click
Heating Element NiChrome
Warm-Up Time 1 Seconds
Vapor Path Steel, Silicon
Country of Manufacture China
Warranty 30 days

Included with Purchase:

  • VaporX XRT
  • Lithium-ion battery (650 MAH) (601 thread)
  • Heating Chamber
  • Concentrate compartment
  • USB Charger with cable
  • Loading Tool and cleaner
  • User Manual

XRT User Guides

*Adobe Reader or PDF viewer Required

Getting the Most Out of Your XRT

  • Keep your XRT as clean as possible to ensure peak performance.
  • When using with solid concentrates, only load as much as one session will use. Overloading will effect performance.

Maintenance

One of the benefits of pen vaporizers is their ultimate simplicity. VaporX has included a handy tool and brush that should be used to clean the inside of the XRT as needed. Make sure you do not contact the coil with the metal tool, it could be easily damaged.

The top metal cap and mouthpiece will definitely need occasional soaking in isopropyl alcohol, inspect them often and keep them clean.

If any concentrate makes it on the outside of the XRT, it can be removed with a warm damp cloth.

Need Assistance with your XRT?

Try these Solutions to common issues:

A: Ensure that your battery is fully charged, and that the safety lock is not engaged by clicking the power button six times. You should see the light on the button blinking, if not plug the battery in and fully charge it.

If you have a fully charged battery that isn’t locked, and you still have no heating, ensure that the connection contacts are clean, and that the heating chamber is fully screwed onto the battery. If you still have no heating, its possible that the atomizer has failed. Replace as needed.

A: This is entirely possible. The XRT may heat aromatic blends to the point of combustion. Please call a VapeWorld representative for more information.

If these troubleshooting tips don’t work, please contact us.

vaporx-logoWant to add a liquid cartridge to your XRT? VapeWorld has you covered.

VaporX XRT 30 Day Warranty

Vapor Corp. is handling all of the warranty requests and service for the VaporX XLT.

  • vapor-corp.com/register

VaporX warrants our products to be free from defects in materials and workmanship for 30 Days from the date of purchase under proper use. Warranty excludes cartridges, misuse or abuse, and any accidental damages.

*IMPORTANT: WARRANTIES NON-TRANSFERABLE. ITEMS PURCHASED ONLINE FROM E-BAY, AMAZON, CRAIGSLIST, ETC. ARE CONSIDERED 2ND HAND AND WARRANTIES NULL AND VOID!

If you need more information about XLT’s Warranty, please contact us

Leave a Reply