quickdraw-logo

 QuickDraw X3 – Vape Vitals
Manufacturer QuickDraw
Tank Style Skillet
Method Direct Draw
Threading 510 / eGo
Battery Li-Ion 390mAh
Warranty 1 Year
Replacement Coils Coming Soon
MSRP 90.00
 
 

quickdraw-x3-vape-world-kb-main-image

Brief Overview

The X3 by QuickDraw offers portable solid and aromatic blend concentrate vaporization in a convenient and pocket-friendly package. The coil-style atomizer heats your materials evenly and produces great-tasting vapor in just seconds. The large chamber provides for easy and infrequent loading.

When using with aromatic blends, we highly suggest using a glass screen so that your blend does not make contact with the heating coil, which can cause overheating. Using an X3 with aromatic blends without a glass screen is not recommended.

See User Guides below for full usage information.

Using Your X3

A: We definitely recommend reading the full instructions located on the ‘User Guide’ tab, but here is a quick rundown on X3 Usage:

Charge the X3 – This could take a few hours the first time, but subsequent charges should not take longer than 46-60 minutes.

Load the X3 – This is easily done by removing the mouthpiece, and using the included tool to apply your concentrates on top of the atomizer coil, or insert a glass screen and load your aromatic blends on top. Do not load too much, more than a sessions worth is definitely too much. Replace mouthpiece.

Power up and Draw – If the switch on the X3 is locked, unlock by pressing the button five times. This enables the power switch and the X3 is ready to use. Press the button and immediately begin drawing from the X3. Draw until you have had your fill, or the ten-second shut off turns the atomizer off.

When using solid concentrates that melt cleanly, many owners find that taking one more draw through a cooling X3 (meaning no power is applied while drawing) helps keep the air vents from clogging.

A: 1 Second
A: When using solid concentrates, its vital that you only use that which melts cleanly and leaves no particulate behind. This particulate can combust when in contact with the atomizer coil, shortening it lifespan. Varying your draw rate slightly will allow you to adjust the density of the vapor output, slower draws will create thicker vapors, and quicker draws will create slightly thinner vapors.

The air intake on the X3 is moderated, so there is only a small amount of adjustment you can make to your draw rate.

A: The X3 was designed mainly for solid concentrates and aromatic blends. Avoid using liquids that do not solidify at room temperatures.
A: Yes. The AC adapter for the USB charging cable is rated from 100v to 240v, however you may need an outlet adapter for locations outside of North America.

USB Charging is also available.

A: When using solid concentrates or aromatic blends, its vital that you only use that which melts cleanly and leaves no particulate behind. This particulate can turn into carbon when in contact with the atomizer coil, shortening its lifespan.

Varying your draw rate slightly will allow you to adjust the density of the vapor output, slower draws will create thicker vapors, and quicker draws will create slightly thinner vapors.

The air intake on the X3 is moderated, so there is only a small amount of adjustment you can make to your draw rate.

A: The atomizer coil is NiChrome, the crucible is ceramic, and the mouthpiece is silicone.
A: Nichrome. Nichrome is a non-magnetic alloy of nickel, chromium, and often iron, usually used as a resistance wire in applications from atomizer coils to toasters and beyond.
A: Overheating is definitely possible. With aromatic blends, its vital that you use a glass screen. This keeps your aromatic blends from making direct contact with the coil, which can lead to overheating. Using an X3 with aromatic blends and without a glass screen is not recommended.
A: With solid concentrates, we don’t recommend loading more than one sessions worth.

With aromatic blends, you can load as much as you can fit in the chamber, as long as you don’t load it too tightly.

A: Inspect your blends as you use the X3, the color will dictate the need for stirring.

If, after the first few times you stir your blends, you find that the blend seems to be browning evenly, you are loading it properly, and may not need to stir.

If you are finding that your blend is browning unevenly, trying loading it more loosely.

A: As a general safety rule, do not leave the X3 unattended while powered on.
A: The atomizer coil is not rebuildable, so when it eventually expires, replace with a new one.

Atomizers will last 4-5 weeks with normal use, your experience may vary.

A: Li-Ion, 390mAh with 510 / eGo threading.
A: The AC adapter for the USB charging cable is rated from 100v to 240v, however you may need an outlet adapter for locations outside of North America.

USB Charging is also available.

Cleaning & Maintenance

A: Always allow X3 to cool COMPLETELY before cleaning, 30 minutes should be sufficient.

Use the included brush/tool to clean inside the crucible, but be EXTREMELY careful not to make contact with the atomizer coil, it can be damaged very easily.

Any solid concentrate that has collected on the outside of the X3 can be cleaned with a warm, damp washcloth.

The mouthpiece and top section of the body that unscrews will incur the most buildup, especially with the use of solid concentrates. This can be cleaned by soaking in isopropyl alcohol.

Always make sure your vaporizer is COMPLETELY dry before plugging it back in to charge.

Do not attempt any internal or external repairs to your unit as doing so may cause fatal injury – or worse – void your warranty! (Please contact us if you feel something is wrong with your vaporizer.)

A: Inspect your X3 each time you use it. Make sure the coil is working perfectly, and that no debris or buildup is clogging the holes. Check the inside of the mouthpiece often, it will get dirty the fastest.

Atomizers will last 4-5 weeks with normal use. Replace as needed.

A: Only on the mouthpeice, and the top metal section that unscrews. Do not use liquids to clean ght atomizer coil.
A: The mouthpiece, and the top metal section that unscrews. Check these often
A: The atomizer is replaceable. Atomizers will last 4-5 weeks with normal use, however your experience will vary.
A: Only use the tool/brush included with the X3.

Ordering – Returns – Warranty

A: 1 Year
A: Not at this time.
A: VapeWorld is handling all QuickDraw warranty requests and service. If you have a warranty issue with your QuickDraw X3, please contact us.
A: Your warranty begins on your purchase date, if you have any questions about your X3 warranty, please contact us.

If you have any other questions about the X3 vaporizer, please contact us!

Product Dimensions 4in x 0.5in x 0.5in (10.2cm x 1.27cm x 1.27cm)
Package Dimensions 7in x 4in x 3in (17.8cm x 10.2cm x 7.62cm)
Product Weight .1lbs (.04kg)
Package Weight .9lbs (.43kg)
Tank Material Skillet
Tank Capacity One Session
Charging Options USB/110v/240v
Battery Type 510 / eGo
Replaceable Battery Yes
Battery Capacity 390 mAh
Resistance TBD
Voltage TBD
Auto-Off? Yes, 10 Second
Safety Power Switch Yes, 5-Click
Heating Element NiChrome
Warm-Up Time 1 Seconds
Vapor Path Steel, Silicon
Country of Manufacture China
Warranty 1 Year

Included with Purchase:

  • QuickDraw X3
    – Lithium-ion Battery
    – Heating Chamber
    – Chamber Connector
    – Mouthpiece
  • Charging Kit
    – USB Charger
    – Wall Adapter
  • Cleaning Brush
  • Loading Tool
  • Glass Storage Jar
  • User Manual

X3 User Guides

*Adobe Reader or PDF viewer Required

Getting the Most Out of Your X3

  • Keep your X3 as clean as possible to ensure peak performance.
  • When using with aromatic blends, you will definitely want to use a glass screen, which keeps the blends from making contact with the atomizer coil. Contact with the coil will lead to instant overheating.
  • When using with solid concentrates, only load as much as one session will use. Overloading will effect performance.
  • When using with solid concentrates, many owners will make one additional draw on the pen which no power is being applied, this helps keep the air intake flowing properly.

    If the intakes do get clogged, press the power button for three seconds, then try to slowly but surely draw on the X3 until it clears.

Maintenance

One of the benefits of pen vaporizers is there ultimate simplicity. Cleaning is often an after thought, QuickDraw has included a handy tool and brush that should be used to clean the inside of the X3 as needed. Make sure you do not contact the coil with the metal tool, it could be easily damaged.

The top metal cap and mouthpiece will definitely need occasional soaking in isopropyl alcohol, inspect them often and keep them clean.

If any concentrate makes it on the outside of the X3, it can be removed with a warm damp cloth.

Need Assistance with your X3?

Try these Solutions to common issues:

A: Ensure that your battery is fully charged, and that the safety lock is not engaged by clicking the power button five times. You should see the light on the button blinking, if not plug the battery in and fully charge it.

If you have a fully charged battery that isn’t locked, and you still have no heating, ensure that the connection contacts are clean, and that the heating chamber is fully screwed onto the battery. If you still have no heating, its possible that the atomizer has failed. Replace as needed.

A: This is entirely possible. If you are not using a glass screen above the coil, your blends will make contact with the coil and instantly overheat. Always use a glass screen with aromatic blends.

If these troubleshooting tips don’t work, please contact us.

quickdraw-logo
As an Authorized Dealer of X3 Products, we offer X3 replacement parts and accessories!

Coming Soon

X3 1 Year Warranty

Vape World is handling all QuickDraw X3 warranty requests and service.

QuickDraw warrants our products to be free from defects in materials and workmanship for one (1) year from the date of purchase under proper use. Warranty excludes cartridges, misuse or abuse, and any accidental damages.

*IMPORTANT: WARRANTIES NON-TRANSFERABLE. ITEMS PURCHASED ONLINE FROM E-BAY, AMAZON, CRAIGSLIST, ETC. ARE CONSIDERED 2ND HAND AND WARRANTIES NULL AND VOID!

If you need more information about X3’s Warranty, please contact us

Leave a Reply