quickdraw-logo

 QuickDraw X2 – Vape Vitals
Manufacturer QuickDraw
Tank Style Wick and coil
Method Direct Draw
Threading 510/eGo
Battery Style Li-Ion 390mAh
Warranty 1 Year
Replacement Tanks Soon
MSRP 80.00
 
 

quickdraw-x2-vape-world-kb-main-image

Brief Overview

The X2 by QuickDraw allows for visible vapor production in a portable package. The glass dome provides the most flavorful vapor yet and is simple to use and clean. Watch the X2’s billowing vapor production as soon as the button is pressed.

See User Guides below for full usage information.

Using Your X2

A: As with most pen vaporizers, the X2 is super easy to use. Refer to the full instructions located on the ‘User Guide’ tab, but here is a quick rundown on using the X2:

Charge the X2 – This could take a few hours the first time, but subsequent charges should not take longer than 45-60 minutes.

Load the X2 – Loading the crucible is easily done by removing the mouthpiece/globe combo, and using the included tool to apply your concentrates on top of the atomizer coil. Do not load too much, more than a sessions worth is definitely too much. Ensure the concentrate the making contact with the atomizer before you replace the mouthpiece. Make sure not to touch the coil with the tool to avoid potential damage.

The X2 ships with a crucible for solid concentrates, but other tank options are available for other concentrated liquids.

Power up and draw – If the switch on the X2 is locked, unlock by pressing the button five times. This enables the power switch and the X2 is ready to use. Press the button and immediately begin drawing from the X2. Draw until you have had your fill, or the ten-second shut off turns the atomizer off.

A: The X2 heats up instantly. With a powerful 390mAh Li-Ion battery, the X2 is ready when you are.
A: There are no temperature settings on the X2. It goes from room temperature to its peak temperature in just one second.
A: First and foremost its vital that you use the cleanest and purest liquids and concentrates you can find. The X2 was designed for use with liquids, or concentrates that melt cleanly and leave no particulate behind.

When this unwanted particulate makes contact with the atomizer, it can overheat. That produces carbon buildup on your atomizer coil, and will degrade the lifespan of your cartridge exponentially.

Since the X2 has only one temperature setting, its essentially foolproof. Press the button, and draw until you have your fill or until the X2 shuts off automatically after 10 seconds.

A: The X2 was designed solely for liquids and concentrates. It ships with a crucible/atomizer for solid concentrates, but other tanks are available.

Do not put aromatic blends into the atomizer included with the the X2. QuickDraw makes aromatic blend atomizers for the X2, please contact them for more information.

A: The charger is rated from 100v to 240v, but you might need an adapter for your outlet if outside North America. USB option is always available, negating the need for AC adapters, regardless of your location.
A: First and foremost its vital that you use the cleanest and purest liquids and concentrates you can find. The X2 was designed for use with liquids and concentrates that melt cleanly and leave no particulate behind.

When particulate makes contact with the atomizer, it can overheat. That produces carbon buildup on your atomizer coil, and will degrade the lifespan of your cartridge exponentially.

Since the X2 has only one temperature setting, its essentially foolproof. Press the button, and draw until you have your fill or until the X2 shuts off automatically after 10 seconds.

A: The atomizer coil is nickel/aluminum-alloy, the crucible that surrounds the coil is ceramic, the body is made of steel.
A: Nichrome. Nichrome is a non-magnetic alloy of nickel, chromium, and often iron, usually used as a resistance wire in applications from atomizer coils to toasters and beyond.
A: Liquids and concentrates love high temperatures, so you should not have an overheating issue!
A: Is best to not fill the heating chamber full. Just apply enough for one session at a time. The X2 was not designed to hold more than one session at a time.
A: Yes, after ten seconds of use, the X2 will power off.

There is also a safety on the power switch, clicking it five times turns off the power button, and repeating this turns the button back on. This is great if you have the X2 in your purse, or pocket, as it prevents it from going off accidentally and wasting your battery or worse.

As a general safety rule, do not leave the X2 unattended while powered on.

A: The X2 atomizers are not rebuildable, so you can also replace them very easily by disconnecting them from the battery, and replace with a fresh atomizer/tank.
A: There are no screens in the X2.
A: The battery is a Li-Ion390mAh barrel eGo ‘style’ battery. It has 510, and eGo threads.
A: The X2 comes with an AC adapter/USB plug, rated from 100v to 240v. The USB plug can be used by itself in a powered USB port anywhere in the world, but if you are charging your X2 outside of North America with the included AC adapter an outlet/plug adapter might be needed.
A: When the X2 Battery is in need of a charge, the power button will flash 3 times when pressed.

At this time, connect the X2 Battery to the X2 Wired USB Charger (at the top of the X2 Battery). The X2 Wired USB Charger can be connected to either the Wall Adapter or any compatible USB port. A red LED light will illuminate at the base of the battery to indicate that a charge is being administered.

Once the red LED light turns green, the X2 Battery has been fully charged.

A: According to QuickDraw, allow 3-4 hours charging time for the first 3-4 cycles. Then, it should only take about one hour to charge, depending on your charging source.

Cleaning & Maintenance

A: Any concentrate that may have collected on the body of your X2 can be removed with a warm damp cloth.

If you need to remove essential oil from inside the crucible, it’s not advisable, but you can do so using your X2 Tool. USE CAUTION and be extremely careful not to damage the atomizer coil.

Within the crucible of your X2 tank, the coil works to clean itself by burning off any residue that comes in contact with it. We don’t recommend using any type of liquid cleaning agent in the X2 tank, as doing so could cause it to malfunction.

The glass globe and mouthpiece can be soaked in isopropyl alcohol until the buildup dissolves. Do not clean the rubber or silicone o-rings with alcohol, as it could damage the rubber. Use warm soap and water to soak until clean. Agitate occasionally while soaking for stubborn buildup.

A: Within the globe of your X2 Tank, the coil works to clean itself by burning off any residue that comes in contact with it. We don’t recommend using any type of liquid cleaning agent in the X2 coil, as doing so could cause it to malfunction. If you need to remove concentrate from the tank, you can do so using your X2 Tool, but we suggest avoiding putting any metal near the atomizer.

The glass globe and mouthpiece, however, will take on a substantial amount of buildup. Monitor and clean as needed.

A: On certain parts alcohol is fine. The top cap will incur the most buildup, soaking it in alcohol or cleaning with alcohol soaked cotton swab are effective cleaning methods.

Cleaning the atomizer is not recommended, replace as needed.

Make sure you don’t expose the atomizer or battery to any liquids whatsoever. If you need to clean the outside of the X2, use a warm damp cloth. If the X2 gets wet in any way, allow to dry in the sun or a warm dry area until COMPLETELY DRY. Attempting to use the X2 if wet will cause serious damage to the unit.

A: The glass globe and mouthpiece will incur the most buildup, soaking them in alcohol or cleaning with alcohol soaked cotton swab are effective cleaning methods. Make sure you don’t expose the atomizer or battery to any liquids whatsoever.
A: The atomizer should be replaced as needed on the X2. Over time even the purest concentrates will allow buildup to collect on the Atomizer coil; removing this with a tool will damage the coil.

Ordering – Returns – Warranty

A: 1 Year
A: Not at this time.
A: Vape World is handling all of the warranty requests and service for the X2. Full warranty and contact information for QuickDraw is available on the warranty tab.
A: Contact us for more information about warranty registration. If you need proof of purchase information for your Vape World purchased X2.

If you have any other questions about the X2 vaporizer, please contact us!

Product Dimensions 4.5in x .9in x .9in (11.4cm x 2.28cm x 2.28cm)
Package Dimensions 7in x 4in x 3in (17.9cm x 10.2cm x 7.6cm)
Product Weight .1lbs (.04kg)
Package Weight .85lbs (.38kg)
Vapor Path Steel, Glass, Plastic
Tank Material Skillet
Tank Capacity One Session
Charging Options USB/110v/240v
Battery Capacity 390mAh
Resistance TBD
Voltage TBD
Auto-Off? Yes, 10 second.
Safety Power Switch Yes, 5-Click
Heating Element Nickel/Aluminum-Alloy coil
Warm-Up Time ~1 Seconds
Country of Manufacture China
Warranty 1 Year

Included with Purchase:

  • QuickDraw X2
    • Lithium-ion Battery
    • G Coil
    • Atomizer
    • Glass Globe
    • Mouthpiece
  • Charging Kit
    • USB Charger
    • Wall Adapter
  • Cleaning Brush
  • Loading Tool
  • Glass Storage Jar
  • User Manual

X2 What's In The Box

X2 User Guides

*Adobe Reader or PDF viewer Required

Getting the Most Out of Your X2

  • Drawing after the heater has cooled down will allow the air vents to stay free of blockage.
  • Never leave a X2 in a hot car. Ever.
  • Allowing the X2 to freeze can damage the atomizer. Avoid temperatures below 40 degrees.
  • Use caution with the included G tool, as it could damage the atomizer coil if you aren’t careful.
  • Overloading more than one session’s worth of concentrate is a potential recipe for mess.

X2 Maintenance

Cleaning the X2 couldn’t be easier. If the atomizer coil has gotten too much buildup, replace it with a new one!

The inside of the glass dome and mouthpiece will take on the most buildup,soak them in isopropyl alcohol or clean with a lightly damp with alcohol cottonswab.

If any concentrate has made it onto the body of the X2, wipe off with a warm damp cloth.

Need Assistance with your X2?

Try these Solutions to common issues:

A: A few things could be causing this. Is the 5-click safety lock in place? Try clicking your X2 button five times and see if anything happens.

Are you getting any light at all from the button? If not, make sure that its charged properly. This seems obvious, until you realize the power strip you were plugged into wasn’t turned on. Or…the USB port you were plugged into wasn’t actually a powered USB port. Or…there are many reasons to think your vaporizer is charging…when it isn’t. It happens all the time.

If you have charged it fully, and unlocked the power button, and are still getting no vapors, remove the mouthpiece, press the button, and see if the atomizer is at least getting warm?

If you have no activity from a fully charged X2, its possible that your atomizer has died. Try that atomizer on the other X2 that came in the package, and see if it works. If not, we have replacement cartridges available.

A: Make sure your X2 is fully charged, and the atomizer coil is fully seated and loaded properly(not overloaded).
A: The X2 was designed for liquids and concentrates only, so loading aromatic blends will result in undesired results. Do not load aromatic blends in coils designed for liquids. QuickDraw makes coils for blends, please contact them for more information.
A: This is a natural situation with the X2. There are two fresh air intake holes on the sides of the X2 atomizer cartridge. They are connected to small holes in the bottom of the crucible. When your solid concentrate melts, it may fill the holes located in the bottom of the crucible. When this liquid cools, it blocks the holes, so drawing is difficult.

This is easily remedied by heating up the X2 for a short time, blocking one of the two holes on the side of the cartridge(they are in the silver band) and drawing. If warm enough, this should clear on one side, then repeat on the other side.

As you continue to use the X2, be mindful of this blockage potential. One trick to prevent it from happening is to continue to draw through through the X2 once a minute as it is cooling. Once all the internals have cooled to room temperature, you can stop.

If these troubleshooting tips don’t work, please contact us.

quickdraw-logoAs an Authorized Dealer of X2 Products, we offer X2 replacement parts and accessories!

Coming Soon

X2 1 Year Warranty

Vape World is handling all of the warranty requests and service for the X2.

QuickDraw warrants our products to be free from defects in materials and workmanship for one (1) year from the date of purchase under proper use. Warranty excludes cartridges, misuse or abuse, and any accidental damages.

*IMPORTANT: WARRANTIES NON-TRANSFERABLE. ITEMS PURCHASED ONLINE FROM E-BAY, AMAZON, CRAIGSLIST, ETC. ARE CONSIDERED 2ND HAND AND WARRANTIES NULL AND VOID!

If you need more information about L1’s Warranty, please contact us

Leave a Reply