Vapor Slide – Vape Vitals
Manufacturer Vapor Slide, LLC
Style Portable
Warranty 1 Year
MSRP $99.99

Brief Overview

The Vapor Slide Pen Vape 2 in 1 is a unique vape that does double duty both as a standard pen vape for liquid concentrates but you can also insert into a the slide of a water device for instant water filtration. Easily adjustable voltage is coded with color LED’s so adjusting the temperature to suite your tastes is a snap.

Charging

A: Insert small end of micro-USB charging cable into the micro-USB port. Plug large end of the charging cable into any USB 2.0 outlet for example on your computer or using your phone USB wall adapter. A red light will turn on just above the micro-USB port to indicate that it is charging and will turn green when fully charged.
A: Yes you can!

Temperature

A: Simply Turn the voltage knob counter-clockwise to set your desired voltage.

Before using the Vapor Slide for the first time (or using a new tank or new e-liquid) turn the voltage knob on top counter-clockwise until the red line on the knob lines up with 3.3V. Increasing the voltage will increase the amount of power going to the coil inside the tank which will produce more vapor.

IMPORTANT: You should always start at the lowest voltage setting when using a new tank or a new e-liquid to avoid burning the coil prematurely.

A: Yes you will.

Usage

A: The Vapor slide could be used freely or with a water pipe. With the tank properly filled and attached to the Vapor Slide, simply inhale as you normally would through the water pipe (or through the Vapor Slide). The Vapor Slide will activate automatically causing the LEDs on top to glow indicating that your e-liquid is vaporizing. When the water pipe has filled with vapor slightly pull the slide out and inhale. If you desire more vapor, turn the voltage knob clockwise to the next higher voltage marking.

IMPORTANT: Although the Vapor Slide can reach a maximum voltage of 4.8 volts, not every e-liquid or tank can handle this much heat. Start at the lowest voltage setting, test it, then increase by one voltage setting at a time to avoid a burning taste. If at any point the vapor tastes burnt, decrease the voltage setting. However, every e-liquid tank will eventually burn out. If your vapor begins to consistently taste burnt regardless of the voltage setting, it is time to replace your tank.

A: To avoid accidental structural damage to your vaporizer, store your Vapor Slide in the included zipper case. Do not leave a tank attached to your Vapor Slide while stored in it’s case. Be careful to securely tighten any bottles of e-liquid that you may store with or near your Vapor Slide, as liquid from a leaky or broken bottle may damage the electronic components of the Vapor Slide.

Tanks of e-liquid should not be stored in excessively hot or cold environments. Excessive heat, such as in a hot car during the Summer time, could cause the coils in the tank to rapidly expand, allowing an unwanted amount of fluid to flood into the mouthpiece. Extreme cold can cause the e-liquid to thicken, which will inhibit it’s ability to wick fast enough and thus burn your wick.

Do not leave your Vapor Slide kit in excessively humid environments, as too much moisture can damage the electronic components of the Vapor Slide.

Any tank used for vaporizing on any device, including the Vapor Slide, will eventually expire with use. The vapor production will decrease, and the flavor will become undesirable. When this happens, it is time to replace your tank.

A:

  • Green: 3.3V
  • Yellow: 3.6V
  • Pink: 3.9V
  • Red: 4.2V
  • Blue: 4.5V
  • Violet: 4.8V

Accessory

A: 90% of cartridges using airflow activation work with Vapor Slide allowing you to stock up on your favorite flavors.

Common Product Issues

A: Yes, the device will shut off after a 8 second draw.

Cleaning & Maintenance

A: After a day’s usage of the Vapor Slide, remove the tank and use a dry paper towel or cotton swab to clean the 510-threading on the bottom cone of the Vapor Slide. If excessive residue has built up on the metal connection, slightly wet your paper towel or cotton swab with rubbing alcohol and wipe the metal connection while holding the Vapor Slide in it’s upright position so as not to let the rubbing alcohol drip inside.

IMPORTANT: Do not submerge the Vapor Slide in water at any time.

Ordering / Returns / Warranty

A: Vapor Slide has a 1 year replacement on the Vapor Slide body only. Vapor Slide, LLC handles the warranty.

This 1 year guarantee will cover everything that could go wrong with vapor slide including breakage.
This will not cover neglect, abuse, or water damage.

Product Dimensions 5.5 in x 2 in
Charging Options Micro USB
Battery Type 18350 1000mah Li-Ion
Battery Capacity 18350 1000mah Li-Ion
Replaceable Battery No
Tank Style Cartridge
Tank Capacity 750ml
Tank Material Ceramic/Pyrex Cartridge
Warm-Up Time 1 second
Vapor Delivery Method Direct draw / Water Pipe
Method Conduction

Included with Purchase:

  • Vapor Slide 2 in 1 Vaporizer
  • Top Coil Ceramic /Pyrex Cartridge
  • USB Charging Cable
  • Titanium Filling Tool
  • User Guide

Vapor Slide 2 In 1

The Vapor Slide has an excellent finish available in Black.

Getting the Most Out of Your Vapor Slide 2 In 1

If any connection problems occur between the Vapor Slide and other cartridges try the following:

  • Take your fingernail and prop up the connection on the bottom of the cartridge.
  • Take a small flat head screwdriver and turn the connection on the Vapor Slide, one turn to the left.
  • When using other cartridges with the Vapor Slide, it is recommended to not exceed 4.2 volts.
  • Voltage options varies by cartridge, please confirm before using.
  • Vapor Slide is not responsible for any damage to other cartridges due to misuse.

Need Assistance with your Vapor Slide 2 In 1?

Try these Solutions to common issues:

A: Make sure the device is fully charged. As well as that the cartridge is not screwed on too tight, this can cause a bad connection.

If these troubleshooting tips don’t work, please Contact us.

Warranty Contact

Vapor Slide, LLC
support@vaporslide.com
MANUFACTURER’S WARRANTY FOR VAPOR SLIDE VAPORIZERS

Vapor Slide 1 year replacement.
Vapor Slide LLC, warrants protects against defects in materials and workmanship under normal use for a period of 1 year from the date of retail purchase by the original end-user purchaser. If a physical defect arises and a claim is received within the Warranty Period, at its option and to the extent permitted by law, Vapor Slide, LLC will replace your Vapor Slide for free. The Limited Warranty does not apply to normal performance degradation of batteries or neglect.

Vapor Slide, LLC Warranty is only serviceable in the US and Canada, as Vapor Slide is only available for purchase in the US and Canada, at this time.

Leave a Reply