PUFFiT-Xx-logo

 PUFFiT-X – Vape Vitals
Manufacturer PUFFiT Vapes
Style Portable
Method Conduction
Warranty 1 Year
90 Days (Battery)
Replacement Parts Not Yet
MSRP $169.00

PUFFiT-X

Brief Overview

Brought to you by Discreet Vape, the PUFFiT-X is the world’s 1st forced air portable. PUFFiT-X features a micro fan for assisted vapor draws on-the-go. Its lightweight and compact design makes it easy to fit in your pocket and take anywhere. PUFFiT-X utilizes an inert gold plated heating chamber that is easy to clean and maintain. An automatic shut-off feature activates after 90 seconds of continuous use to help conserve your rechargeable Lithium-ion battery.

See User Guides below for full usage information.

Using Your PUFFiT-X

A: With a vaporizer designed to be discreet, operation has to be simple, and the PUFFiT-X does not disappoint.

Once the heating chamber has been loaded fully but not loaded tightly and the top lid replaced, remove the mouthpiece cap which also acts as a defacto power button. Make sure the temperature is set on the small manual dial according to the need of your particular blend:

Level 1 – 250°F (121°C)
Level 2 – 280°F (138°C)
Level 3 – 300°F (149°C)
Level 4 – 330°F (166°C)
Level 5 – 350°F (177°C)
Level 6 – 380°F (121°C)
Level 7 – 400°F (193°C)
Level 8 – 430°F (221°C)

Press down the top cap for three seconds, to engage the heater. The red light in the airpath means that the PUFFiT-X is charging, when it turns green, you are ready to vaporize. Hold down the top cap again and hold, this engages the fan and the vapors should begin flowing.

Using the included spring optimizer in the top cap is highly recommended.

A: The unit is the same size as the PUFFiT, with improved heating for more even vaporization and a micro turbo fan for clear forced air vapor. It also has an upgraded case, an added AC adapter, and a filling funnel.
A: Absolutely. There are seven different fans speeds to choose from, but be mindful that higher fan speeds will deplete the battery faster than slower fans speeds.

  • Press and hold the top cap while removing magnetic mouthpiece cap.
  • Continue to hold top down, while adjusting dial(fans speed)
  • Replace magnetic cap to save new speed value.
A: The PUFFiT-X excels with a fine grind level; particles that are just larger than the screen.

Using the included spring optimizer in the top cap is highly recommended.

A: Roughly 30 Seconds
A: Nope! The manual dial that you set should hold its position, so you would only need to change the temperature if you are using a different blend than the last time you used the PUFFiT-X.

Best practice is to start with low temperatures, and work your way up until you find the vapor sweet spot.

A: The three main factors that will determine vapor quality are oven temperature, grind quality/consistency, and draw rate.

Best practice is to start with low temperatures, and play with the those variables until you find the vapor sweet spot.

A: The PUFFiT-X was designed for aromatic blends only. Liquids and concentrates should not be used.
A: The PUFFiT-X is charged by mini-USB(Phones use micro-USB) so you have many charging options, anywhere you can plug USB into. There is no 110V or 240v usb wall adapter included, just a mini-USB cable.
A: 250°F to 430°F ( 121°C to 221°C)
A: 430°F (221°C)
A: The PUFFiT-X was not designed to be a “big clouds” vaporizer. However, vapor production can vary a lot depending on type of blend, moisture content, fineness of grind etc. A temperature setting of 7-8 should provide noticeable vapor for just about any blend. Be sure to really FILL the heat chamber. Most new PUFFiT-X owners underestimate how much material to put into the unit. Best results are achieved from finely ground material loaded firmly into the heat chamber.

The three main factors that will determine vapor quality are oven temperature, grind quality/consistency, and draw rate.

Best practice is to start with low temperatures, and play with the those three variables until you find the vapor sweet spot.

Start with just increasing the temps(gradually, and allowing the PUFFiT-X 30 seconds to adjust) and see if you find the thickness you are after.

A: There is no temperature readout on the PUFFiT-X, so there is no conversion. However, Below is the numerical settings converted to Celsius.

Level 1 – 250°F (121°C)
Level 2 – 280°F (138°C)
Level 3 – 300°F (149°C)
Level 4 – 330°F (166°C)
Level 5 – 350°F (177°C)
Level 6 – 380°F (121°C)
Level 7 – 400°F (193°C)
Level 8 – 430°F (221°C)

A: The airpath is mostly silicone and plastic, with small amounts of stainless steeel. The body is high-impact plastic.
A: The PUFFiT-X is a conduction vape, and the heating element is gold plated.
A: The PUFFiT-X is capable of temperatures of 420°F (221°C) so in theory, it is possible, depending on the particular blend you are using.

Best practice is to always start with a low temperature, and gradually work your way up (allowing the PUFFiT-X 30 seconds each time to adjust) until you find your vapor sweet spot.

A: Smaller amounts will work fine, but loading the chamber full will create the densest vapors. load fully, but not tightly.
A: If using the included optimizer, you should not need to stir. But, if you feel you want to stir, please do so as needed.
A: Simply plug your PUFFiT-X vaporizer into any standard USB source using the supplied cable. It will not harm the battery to charge it before a low battery warning! When in doubt… plug it in!
Standard charging time will be about 2.5-3 hours. It will not harm the battery to charge it before a low battery warning! When in doubt… plug it in!
A: Total uses vary with temperature settings and blend but you should get between 25-30 cycles on a full charge. Do not attempt to use your PUFFiT-X vaporizer while charging. Always remove USB cable before starting a vaporizer cycle.
A: This is the temperature setting. Temperature ranges from 120°C (250°F) to 220°C (430°F) refer to the instruction manual for more information.

Level 1 – 250°F (121°C)
Level 2 – 280°F (138°C)
Level 3 – 300°F (149°C)
Level 4 – 330°F (166°C)
Level 5 – 350°F (177°C)
Level 6 – 380°F (121°C)
Level 7 – 400°F (193°C)
Level 8 – 430°F (221°C)

A: Check your charging source. If using a laptop or PC, make sure your computer does not go to sleep as some computers shut off power to the USB port during this time. This would mean that even though your unit is plugged in, it’s not charging. If that’s not a problem, try using another USB cable. Note that a full charge takes 2.5-3 hours.
A: The flashing LED tells you what your PUFFiT-X vaporizer is doing. The LED indicates low battery, heating, cooling, charging etc. PUFFiT-X LED's

PUFFiT-X LED Troubs

A: Yes. The aluminum cap will get hot with prolonged use. A silicone heat guard is provided to reduce the potential to overheat tender fingers but when in doubt, replace the mouth cap and allow the PUFFiT-X vaporizer to cool!
A: The included mouth piece covers are made of food grade Polypropylene and are meant to provide a clean surface for individual users (in case you want to share your vapour but don’t want to share your germs). They also prevent contamination of USB socket and temp wheel. They are washable and replaceable.
A: No. The integrated high power Lithium battery is made from the latest technology. With care and regular charging it should last for years! Love your PUFFiT-X vaporizer? Charge it regularly!
A: The PUFFiT-X will turn off after 3-minute period as a safety feature and also to conserve battery life. To reactivate the PUFFiT-X, place the mouthpiece cover on, then remove then press the top cover for three seconds allowing the PUFFiT-X to reheat.

As a general safety rule, do not leave the PUFFiT-X unattended while powered on.

A: The PUFFiT-X uses .5in (1.27cm) screens.

Cleaning & Maintenance

A: Always allow your PUFFiT-X to cool COMPLETELY before cleaning, 30 minutes should be sufficient.

For occasional chamber cleaning, A cotton swab with a little rubbing (isopropyl) alcohol works very well. DO NOT submerge the PUFFiT-X vaporizer or place it under running water. NEVER use a knife or other hard sharp object as it can damage the heating chamber. We have created a video that walks you through the process step by step.

The PUFFiT-X vapor path requires a slightly more complicated cleaning process than most vapes, requiring a generic syringe to fully clean/flush the vapor path.

Always make sure your vaporizer is COMPLETELY dry before plugging it back in to charge.

Do not attempt any internal or external repairs to your unit as doing so may cause fatal injury – or worse – void your warranty! (Please contact us if you feel something is wrong with your vaporizer. )

A: Inspect your PUFFiT-X often for signs of buildup, and clean as needed. Your PUFFiT-X will tell you when it needs to be cleaned.
A: Never bring open containers of liquids near the PUFFiT-X but using isopropyl alcohol on a cotton swab to clean the heating chamber, or via syringe to flush the vapor path.
A: The heating chamber and silicone vaporpath will incur the most buildup, clean these areas often to ensure peak performance of your PUFFiT-X.
A: If you need extra screens, or need to replace the mouthpiece covers, please contact us
A: Cotton swabs, salt, isopropyl alchohol and a syringe will be all you would ever need.

Ordering – Returns – Warranty

A: The PUFFiT-X vaporizer is covered by a 1 Year limited replacement warranty. The battery is covered by a 90 day limited warranty. You should register your PUFFiT-X vaporizer when you purchase it to ensure expedient Warranty claims. Contact Vape World first for fast warranty replacement. Warranty is not transferable and does not apply to third party resellers such as eBay, Amazon, Rakuten etc. Customers who have purchased through Third Party resellers should resolve their warranty issues through their seller. A valid serial number and full warranty registration is required for warranty claim. Warranty only applies to units sold through Authorized Discreet Vape distributors, such as Vape World.
A: Not at this time.
A: VapeWorld is handling all warranty requests & service.

If you have a question about your PUFFiT-X Vape World Purchase, please contact us!

A: Its extremely important to register your PUFFiT-X after purchase, contact PUFFiT-X directly for more information.

If you have any other questions about the PUFFiT-X vaporizer, please Contact us!

Vapor PathGold, Silicone tubing, stainless steel screen, plastic

Product Dimensions 3.6in x 1.3in x 1.3in (9.14cm x 3.3cm x 3.3cm)
Package Dimensions 5in x 3in x 3in (12.7cm x 7.62cm x 7.62cm)
Product Weight .18lbs (.08kg)
Package Weight 1lbs (.45kg)
Charging Options Mini-USB
Battery Type Li-Ion
Replaceable Battery No
Heating Element Gold Plated Brass
Warm-Up Time >30 Seconds
Vapor Delivery Method Forced Air/Direct Draw
Country of Manufacture China
Warranty 1 Year

Included with Purchase:

  • PUFFiT-X Vaporizer
  • Magnetic Mouthpiece Cap
  • Wall Charger
  • USB Cable
  • Charging Stand
  • 4 Screens
  • Silicone Heat Cap
  • Neoprene Carry Bag
  • 3x Mouthpiece Cover
  • Wire Cleaning Tool
  • Filler Funnel
  • User Manual

PUFFiT-X Whats in the Box

The PUFFiT-X is currently available in Green, Gray and Purple.

HANDHELD_PUFFITX-ALL-3-COLORS-2RV

PUFFiT-X User Guides

  • Coming Soon
*Adobe Reader or PDF viewer Required

Getting the Most Out of Your PUFFiT-X

  • Keep the crucible, upper screen, silicone tube and mouthpiece covers clean, they will experience the most buildup. Soak in isopropyl alcohol as needed. .
  • Never soak the PUFFiT-X in any liquid, for any reason whatsoever
  • The PUFFiT-X likes finely ground blends, so make sure that you grind is small and consistent(all particles are relatively the same size).
  • Remove your vaporized blends from the heating chamber as soon as you can after they are depleted, this will cut down on buildup dramatically.
Keeping your PUFFiT-X clean is the best way to ensure its peak performance.

  • Let your PUFFiT-X cool down completely before performing any cleaning duties.
  • The mouthpiece and heating chamber will take most of the buildup. Soaking in isopropyl alcohol until the buildup has dissolved will clean them perfectly. The PUFFiT-X comes with 4 screens, so while your soaking your dirty screen, you always have an extra ready to go.
  • To clean the chamber, use a cotton swab that is SLIGHTLY damp with isopropyl alcohol. swirl in a circular motion until all debris and buildup is removed.
  • DO NOT, under any circumstances, use anything metallic to clean or dislodge debris from inside the heating chamber. If you scratch the surface, that scratch will forever be a difficult area to clean. If you must use something to dislodge debris, use plastic. Soft plastic.
  • The PUFFiT-X body can be cleaned with a warm damp cloth. Damp cotton and cloths should be sufficient to clean the unit itself, and if you have something that has become lodged in the grill, they can be removed carefully and cleaned with the included chenile sticks. Never bring liquids near the PUFFiT-X.
  • Emptying the heating chamber/mouthpiece immediately after use will cut down on the buildup you experience.
  • After cleaning always allow all parts to completely air dry before use.

Need Assistance with your PUFFiT-X?

Try these Solutions to common issues:

A: Make sure the PUFFiT-X is fully charged.
A: Make sure the PUFFiT-X is fully charged, and make sure your blend is finely ground, but with particles that are just larger than the screen hole size.
A: The PUFFiT-X has an potential temperature of 430°F (221°C), so depending on your particular blend, it is possible to overheat. But with careful planning and adjustment, as long as you have the proper temperature set for your particular blend, you should never overheat.

Best practice with any blend, or with any new blend, is to start with the PUFFiT-X set at a low temperature, and work your way up incrementally(allowing the PUFFiT-X 30 seconds to catch up) until you find your vapor sweet spot.

If these troubleshooting tips don’t work, please contact us.

PUFFiT-Xx-logoPlease contact us for information on Puffit and Puffit-X accessories.

PUFFiT-X 1-Year Warranty Info & Contact

All PUFFiT-X warranty requests and service is being handled by VapeWorld

The PUFFiT-X vaporizer is covered by a 1 Year limited replacement warranty. The battery is covered by a 90 day limited warranty. You should register your PUFFiT-X vaporizer at the link above soon after your purchase to ensure expedient Warranty claims.

Warranty is not transferable and does not apply to third party resellers such as eBay, Amazon, Rakuten etc. Customers who have purchased through Third Party resellers should resolve their warranty issues through their seller. A valid serial number and full warranty registration is required for warranty claim. Warranty only applies to units sold through Authorized PUFFiT-X Vape distributors, such as VapeWorld.

Contact Vape World first for any questions about your PUFFiT-X.

Leave a Reply