Puffco Plus – Vape Vitals
Manufacturer Puffco
Style Pen
Charging Time 35 Minutes
Warranty 1 Year
MSRP $99.98

Brief Overview

The Puffco Plus brings industry leading features like an all-ceramic heating chamber that uses no coils, the ‘Dart’ which funnels excess condensate down back into the oven. The Puffco Plus’s have an extraordinary polished finish. The extra large heating chamber is super easy to load and the all-ceramic construction imparts zero flavor. You only taste what you load!

Charging

A: 35 minutes varying on the power source (wall outlet recommended)
A: About 50 puffs on the “High” setting (battery length varies with temperature setting)
A: The charger is USB and will work globally.
A: Simply remove the atomizer from the battery, and connect the battery to the charger, then plug in a USB port!
A: The red light on the dock will change to green.
A: The power button will flash when you press it.

Temperature

A: Once the unit is on, click the button 4 times to change the heat setting.
Green indicates low heat.
Blue indicates medium heat.
Red indicates high heat.
A: No you do not, the Puffco Plus will remember whatever heat setting you last had it on.

Usage

A:

  • Click the cloud button 5 times to turn the unit on and off.
  • Click the cloud button 4 times to change the temperature setting.
  • Use the Dart inside the mouthpiece to load your material into the chamber. Twist the mouthpiece back on.
  • For regular use hold the cloud button down and inhale. Pen will automatically shut off after 8 seconds of use.
  • Click the cloud button 2 times to enter Sesh Mode. Pen will stay on for 12 seconds. Press the button again to exit Sesh Mode.
A: It is recommended to only load enough for one session.
A: Click the cloud button 2 times to enter Sesh Mode. Pen will stay on for 12 seconds without holding the cloud. Press the button twice again to exit Sesh Mode.

Do not fire the pen more than three times consecutively on Sesh Mode.

Accessory

A: The Chamber, The Dart, Mouthpiece and Battery are all replaceable!

Common Product Issues

A: Yes, it will shut off after 8 seconds of continuous use.

Cleaning & Maintenance

A: To clean the Puffco Plus, warm up the chamber in ‘Sesh’ mode. Remove the mouthpiece then use a qtip to clean the inside of the chamber.

Wipe the threads on the mouthpiece and clean the connectors on the battery and bottom of the chamber using a cleaning swab.

A: It is only recommended to use an alcohol swab on the threads of the device, not in the chamber. You can also soak the mouthpiece in isopropyl, then rinse it off and dry before placing it back on.

Ordering / Return / Warranty

A: All Puffco units come with a one year warranty from the date of retail purchase.
A: Your Puffco unit should come with a QR CODE card included in your kit. You can use any QR Code Scanner on your phone to scan the card and register your unit for Warranty.

If you experience any issues doing so, simply send a photo of the card over to support@puffco.com and our team will manually register your warranty.

A: Puffco will handle the warranty on your Plus.
Product Weight .32lb
Charging Options USB
Battery Style Barrel
Replaceable Battery No
Recharge Time 35 Minutes
Tank Style Coil Free
Tank Capacity One Session
Heating Element Ceramic
Warm-Up Time ~ 1 second
Method Convection
Vapor Path Ceramic
Vapor Delivery Method Direct Draw
Warranty 1 Year

Included with Purchase:

  • Puffco Plus Vaporizer
  • 1x Extra Plus Chamber
  • USB SuperCharger
  • Cotton Swabs

Puffco Plus

The Puffco Plus has an excellent finish available in Black.

Getting the Most Out of Your Yocan Evolve Plus

  • For most efficient use, load a single use amount onto the dart, put pen in “Sesh mode,” use until chamber is empty.
  • Hold pen vertically to ensure contents heat efficiently.
  • When the battery is low, vapor production may be reduced. A full battery will provide the best result.
  • Remove the Dart for easy cleaning.

Need Assistance with your Puffco Plus?

Try these Solutions to common issues:

A: A few things could be causing this. Is the 5-click safety lock in place? Try clicking your Plus button five times and see if anything happens.

Are you getting any light at all from the button? If not, make sure that its charged properly. This seems obvious, until you realize the power strip you were plugged into wasn’t turned on. Or…the USB port you were plugged into wasn’t actually a powered USB port. Or…there are many reasons to think your vaporizer is charging…when it isn’t. It happens all the time.

If you have charged it fully, and unlocked the power button, and are still getting no vapors, remove the mouthpiece, press the button, and see if the atomizer is at least getting warm?

If you have no activity from a fully charged Plus, it’s possible that your atomizer has died. We’ll have replacement cartridges available.

A: Make sure you Plus is fully charged, and the atomizer coil is fully seated and loaded properly (not overloaded). Try different temperature settings to get thicker vapor.
A: If this occurs, allow the Plus to heat up for five seconds, and try to draw, this should allow the concentrate blockage to free itself.

As you continue to use the Plus, be mindful of this blockage potential. One trick to prevent it from happening is to continue to draw through through the Plus once a minute as it is cooling. Once all the internals have cooled to room temperature, you can stop.

If these troubleshooting tips don’t work, please Contact us.

Warranty Contact

Puffco Plus offers 1 Year warranty.

The Puffco Support team is available: Monday-Friday 10AM – 6PM EST

Submit request: Puffco Requests

Email: Support@puffco.com

Leave a Reply