PAX – Vape Vitals
Manufacturer PAX Labs, Inc.
Style Portable
Method Conduction
Charging Time 2 hours
Warranty 10 Year Limited
Replacement Parts See Them All
MSRP $249.99

pax-vape-world-kb-main-image

Brief Usage Overview

 

Small enough to fit in your pocket or purse, PAX heats your aromatic blends to release a delicious, satisfying vapor. This simple and sleek device is the world’s most pocketable, premium vaporizer. Load aromatic blends into PAX’s oven and lightly tamp down. Power on PAX by pressing in the retractable mouthpiece and allowing it to spring into the “on” position. PAX’s indicator light will turn green once fully heated and ready for use. Removing the mouthpiece reveals a temperature button to cycle through presets as needed.

See User Guides below for full usage information.
 
 
 

Using Your PAX

A: PAX was designed to be easy to use. Starting with a fully charged PAX, simply fill the oven with your medium-fine ground blend, turn PAX on by clicking the mouthpiece open, and wait for the purple ‘X’ to turn green, and begin to draw!

Please refer to PAX user guide on the ‘User Guide’ Tab along with cleaning and mouthpiece lubrication instructions.

A: PAX prefers a medium-fine grind consistency, firmly loaded.
A: PAX should pre-heat in as little as 30 seconds.
A: PAX has three settings, low, medium and high. These are chosen via a LED button that is revealed when the mouthpiece is removed. The setting you chose will remain after you power cycle PAX.
A: Factors such as grind consistency(the same particle size throughout), grind size(medium-fine is best, avoid finely ground, and hand-ground blends.) combined with your draw rate will all determine the vapor quality. Vary these factors as needed to find your desired vapor quality.
A: No, we highly advise against the use of liquid or solid concentrates in your PAX.  
A:

  • Yellow = 370° F (188° C)
  • Orange = 390° F (199° C)
  • Red = 410° F (210° C)

pax_power

A: No, PAX is a true vaporizer, gently heating aromatic blends to release vapor.  
A: PAX is made from the highest quality stainless steel, used in the conduction oven and vapor path. The outer shell is made from anodized aluminum casing in four colors.
A: Proprietary, w/ Stainless Steel Oven
A: Firmly fill your blends until the oven is full.
A: Once every 3-4 draws is sufficient. This will vary depending on climate and blend.
A: PAX’s screens are completely unique, and not measured in the standard way.
PAX Parts & Accessories
A: Your PAX screen is specially designed as a solid plate without holes, though it does have a screen-like pattern. The air circulation is facilitated by the scalloped edges and rounded corners of the screen.
PAX Parts & Accessories
 
A: About 2 hours to fully charge the battery.
A: The device has an on-board accelerometer. If the device sits still for 20 seconds, it goes into standby mode, your Pax light will turn blue and will reach a lower heat setting, around 150°C. Once you pick the device up or move it, PAX will heat up and the LED will turn green (heated) or purple (heating) based on current temperature, then will return to the last temperature setting selected.

If the device sits still for 3 minutes, PAX will shut off. A bumpy car ride is enough motion to keep the device awake.

As a general safety rule, do not leave PAX unattended while powered on.

A: The device has an on-board accelerometer. If the device sits still for 20 seconds, it goes into standby mode, your PAX light will turn blue and will reach a lower heat setting, around 150°C. Once you pick the device up or move it, PAX will heat up and the LED will turn green (heated) or purple (heating) based on current temperature, then will return to the last temperature setting selected. If the device sits still for 3 minutes, PAX will shut off. A bumpy car ride is enough motion to keep the device awake.
A:  Originally, PAX vaporizers only accepted 100-120 volts. A revision was quickly made and, now, all PAX vaporizers come with a charger that supports 100-240 volts. Vape World carries the latest PAX inventory with the 100-240v chargers. However, the charger’s prongs will only fit an American outlet. Please refer to your charger’s label for voltage details.
A: Yes, the current batch of PAX chargers support 110-240 volts; however, you will likely still need to use the appropriate converter for your location and outlet system to avoid damaging the unit.  
A: No, PAX must be charged and off of the charger before use.
A: We recommend puffing on PAX like a cigar, or sipping on the vapor as if it were hot tea.
A:
The device has an on-board accelerometer. If the device sits still for 20 seconds, it goes into standby mode (lower heat setting, around 150C). Pick the device up or move it, and it will heat up to the last temperature setting selected. If the device sits still for 3 minutes, it will shut off. A bumpy car ride is enough motion to keep the device awake.
A: With PAX facing you, place your finger or thumb on the top right side of the mouthpiece. Depress the mouthpiece slowly until you hear a click. If you bottom it out, you have gone too far and the mouthpiece will not lock into place.
A: Hold Pax horizontally in front of you and roll it towards yourself multiple times. Party mode overrides the standby mode while the LED continuously flashes multiple colors.   

Cleaning & Maintenance

A: Always allow PAX to cool COMPLETELY before cleaning, 30 minutes should be sufficient.

Do not attempt any internal or external repairs to your unit as doing so may cause fatal injury – or worse – void your warranty! (Please contact us if you feel something is wrong with your vaporizer.)

Handle your PAX with care, as you would any sensitive electronic device.

Inspect your PAX periodically, paying particular attention to the mouthpiece, vapor path,and screen/oven.

PAX has provided a handy cleaning guide which is located on the ‘User Guide’ tab on the left, and we carry replacement PAX cleaning kits if your supplies have run low.

Always make sure your vaporizer is COMPLETELY dry before plugging it back in.

A: PAX is a precision device. It’s important to clean PAX on a regular basis. If you clean your PAX well, it shouldn’t need to be cleaned for at least a dozen or so uses to remain in top performance. Of course, the more the merrier! Please note, wetter tobacco may require more frequent cleaning. Inspect your parts periodically, they will tell you when they need to be cleaned.
A: Avoid bringing any liquids near Pax or vice versa. We definitely recommend the cleaning swabs that come with Pax or its replacement cleaning kit. You can soak the mouthpiece and the screen in alcohol, but no other part!
A: As you periodically inspect PAX, focus on the removable mouthpiece, the vapor path, and oven.
A: if you have lost or damaged any part of your PAX, check out PAX parts page for replacement parts, or contact us if you have further questions.
A: Start with PAX cleaning kit, and that should take care of most needs. Contact us if it does not.
A: This lubricant is made from propylene glycol, and is not intended to replace cleaning; however, if your Pax mouthpiece action seems to be a bit sticky, and/or if your PAX LED indicator displays the temperature setting when your mouthpiece is in the “on” position, applying this lubricant should resolve the issue.
A: PAX’s mouthpiece can be submerged in isopropyl alcohol. 90% or higher is ideal, but 70% will work. Submerge and wait 20 minutes, then agitate. Use PAX’s cleaning tool inside the stainless steel mouthpiece stem if needed. If any residue remains, repeat process.
A: Apply a small droplet of lubricant into the stem of the metal tube and another droplet on the outside of the tube. Use the packet to smudge it all around the tube and under the sliding ring. Re-insert your mouthpiece into PAX and press the mouthpiece in and out a few times to distribute the lubricant. You don’t need a large amount – a little goes a long way!

Pax has provided a handy PDF that explains it visually.

A: We recommend that you do not soak the oven lid. Isopropyl alcohol can be applied to a cotton swab to wipe the oven lid clean.  

Ordering – Returns – Warranty

A:  There is a 10 year warranty on PAX.
A: Nope, but few vaporizers in the industry have a warranty that lasts this long.
A: Please contact PAX:
All PAX and PAX accessories are warrantied by PAX.

  • 1 844-756-6637
  • Pax Support Hours: Monday-Friday, 9am – 5pm PT.

Contact Us if you have any additional questions. 

A: We are always glad to assist our valued customers in discounts and price matching, whether retroactively or at the time of your order. At this time, there are no applicable discount codes for Pax Vaporizers or Pax products. If you are interested in any accompanying products such as a stash case, grinder, or other accessories, the following coupon code will add a 10% discount on any applicable item: the10percent. 
A: Pax handles all warranty requests for Pax vaporizers and Pax products. For more warranty info, check the warranty tab to the left or Contact Us if you have any warranty questions. 
A: One of the many conveniences of your Pax’s 10 year warranty is that it doesn’t require being registered. Once you had purchased your Pax it went into effect. All you will need for future warranty concerns is your receipt confirming your purchase; make sure to save this in your records in preparation. If your Pax was purchased through Vape World, we have your receipt on file and can easily locate proof of purchase based on your name, phone number, email address, and/or shipping address.
A: Every Pax vaporizer bought at VapeWorld is backed by Pax’s 10 year manufacturer’s warranty. Vape World honors this warranty and can help facilitate the process at your request. In the event that your Pax is malfunctioning, please refer to the warranty tab to the left for manufacturer’s contact information or Contact Us if you have any warranty questions. Click here for more information on Vape World’s Return Policy. Vape World Return Policy

If you have any other questions about Pax Vaporizer, please Contact Us! 

Pax Parts & Accessories

Product Dimensions 4.125in x 1.4in x .875in (10.5cm x 3.6cm x 2.2cm)
Package Dimensions 6in x 6in x 1.75in (10.5cm x 3.6cm x 2.2cm)
Product Weight 3.4 oz (95 g)
Package Weight 14.4 oz (408.2g)
Charging Options 110v A/C Adapter
Battery Type Li-Ion
Replaceable Battery No
Recharge Time ~ 2 Hours
Battery Capacity 2600 mAh
Heating Element Proprietary, w/ Stainless Steel Oven
Warm-Up Time ~30 Seconds
Vapor Path Stainless Steel, Plastic
Vapor Delivery Method Direct Draw
Country of Manufacture Designed in San Francisco, Made in China
Warranty 10 Year Limited

Included with Purchase:

  • Pax Vaporizer
  • Screen
  • Mouthpiece
  • Oven Lid
  • Charging Dock
  • Charging Cord
  • 5x Cleaning Tools
  • 5x Cleaning Wipes
  • 2x Lubricant Packets
  • User Manual
plm-pax_3

Amethyst Purple, Onyx Black, Cobalt Blue, Emerald Green

Pax User Guides and Cleaning Manuals

*Adobe Reader or PDF viewer Required

Getting the Most Out of Your Pax

  • First things first, two hours on the charging dock = a happy Pax.
  • A firmly loaded, full oven = an even happier Pax!
  • With a clean and lubricated mouthpiece, Pax runs like a well-oiled machine.
  • Fully satisfied? To power off, press the mouthpiece GENTLY inward until the FIRST CLICK.
  • Your Pax is smart. Learn what its LED indicator is telling you in the included User Guide.

pax_power

Maintenance

Pax is a precision device and should be cleaned on a regular basis. While Pax is powered on, remove mouthpiece and soak in soap and water. Let mouthpiece dry before replacing. To clean Pax body, remove mouthpiece and oven lid. Moisten cleaning tool with supplied alcohol wipe. Starting from the mouthpiece end, insert moistened cleaning tool into the vapor pathway, pushing out the oven screen. Floss Pax with cleaning tool. To clean Pax oven, oven lid, and screen, use a moistened bent cleaning tool or moistened cotton swab to remove residue. Screens will need to be replaced as necessary. Apply lubricant after every cleaning session.

Lubricant Instructions
  • Open lubricant packet.
  • Drip a small droplet of lubricant into the stem of the metal mouthpiece tube.
  • Apply another small droplet on the outside of the metal tube. Use the packet to smudge it all around the tube and under the small sliding part.
  • Replace your mouthpiece into Pax and press the mouthpiece in and out 10-20 times to distribute the lubricant.
  • Enjoy!

Need Assistance with your PAX?

Try these Solutions to common issues:

“A: PAX’s mouthpiece does not have a vapor path in the center; it is located directly above the silver stem, under a little lip on the side. To confirm this, remove the mouthpiece and oven lid from the unit, then blow through PAX with your hand on the oven side to see if any air can be felt.
A: Ensure PAX is fully charged. The front LED should illuminate on the charger. The LED should also illuminate when PAX is turned on.
A: Grind blends finely and fill the oven tightly. If your PAX’s oven is cooled off, you can tamp your blends down with the short side of your oven lid. Draw from PAX like a cigar; a series of short puffs.
A: Clean metal charging contacts, try charging with PAX oriented opposite direction on dock. Contact us if this is unsuccessful.  
A: Blow warm air from your mouth into the mouthpiece area.  Contact us  if this is unsuccessful.  
A: This is VERY common for first time users. With PAX’s front LED facing you, place finger or thumb on the right side of the mouthpiece. Depress the mouthpiece slowly until you hear a click. If you bottom it out or hear a second click, you have gone too far and the mouthpiece spring will not lock into place. It may take a few tries!
A: While removing your unit from the charger, there may have been some intermittent connection made between the electrical contacts. When this happens, your PAX will initiate a new charging/condition cycle, and will take awhile to turn green on the charger again. During this time, checking your battery life might result in a yellow (medium) charge indication despite the battery being full. To prevent this from occurring, please make sure to fully remove your PAX from the charger quickly to assure the contacts are not making a brief connection. 

If these troubleshooting tips don’t work, please Contact us.

PAX Parts & Accessories

As an Authorized Dealer of PAX Products, we offer a full line of PAX replacement parts and accessories by PAX!

Warranty Contact

All PAX and PAX accessories are warrantied by PAX.

  • 1 (888) 628-5948
  • PAX Support Hours: Monday-Friday, 9am – 5pm PT.

10 Year Ltd. Warranty

PAX Labs, Inc. warrants PAX against defects in materials and workmanship under normal use for a period of ten (10) years from the date of retail purchase by the original end-user purchaser. If a physical defect arises and a claim is received within the Warranty Period, at its option and to the extent permitted by law, PAX Labs, Inc. will either (1) Repair the product defect, (2) Exchange the product with a product that is new or is at least a functionally equivalent product, or (3) Refund the purchase price of the product. The Limited Warranty does not apply to normal performance degradation of batteries or neglecting to adhere to cleaning instructions. Please contact PAX Support to learn more about our Battery Replacement Service. PAX Warranty is only serviceable in the US and Canada, as PAX is only available for purchase in the US and Canada, at this time.

Exclusions and Limitations

The Limited Warranty applies only to products manufactured by PAX, Inc. The Limited Warranty does not apply to any non-PAX products. This warranty does not apply to (a) damage caused by accident, abuse, misuse, flood, fire, earthquake, acts of piracy, or other external causes; (b) to damage caused by operating the product outside the permitted or intended use as described by PAX; (c) to a product or part that has been modified to alter functionality or capability; (d) to cosmetic damage, including but not limited to scratches, dents, and broken plastic. Important: Warranty applies to original end-user purchaser only and is non-transferable. Warranty does not apply should you purchase through a 3rd party reseller such as eBay and Craigslist. PAX warranties only apply to devices purchased at any authorized retailer serviced by an authorized PAX distributor. For questions regarding authorized retailers, please contact us via email. If you prefer to contact us by phone, please email PAX’s support team with your phone number and preferred call back time. Intentionally opening up or disassembling your device in any way will void your warranty.

Counterfeiting

Counterfeiting The fight against unauthorized sales and counterfeiting is a long-term commitment to quality and service by PAX . PAX is dedicated to ensuring PAX customers receive the modern technologies, beautiful design and world-class support that encompass the brand. PAX advises consumers to be cautious when purchasing devices from unauthorized resellers as the quality, reliability and safety of these products is uncertain and in some cases, may expose the user to serious dangers not encountered with genuine PAX products. PAX has a devoted team who actively pursues and investigates unauthorized resellers and counterfeiters in an effort to protect customers and business partners. By finding counterfeiters and taking legal action against them, we’re doing our part since many people do not understand the global ramifications of counterfeiting, or the cycle of abuse they are supporting when purchasing counterfeit goods. While PAX would like to help the victims of counterfeiting we’re not able to reimburse money used to purchase infringing goods since such goods were not bought from PAX, nor do we assist with the resolution of disputes, including assistance with PayPal or credit card refunds. Contact PAX to learn more about authorized dealers, as any product purchased outside of our exclusive sales network runs the risk of being counterfeit and is not guaranteed under warranty.

If you need more information about PAX’s Warranty, please Contact us

Leave a Reply