innokin-logo

 Innokin iTaste MVP 3.0 – Vape Vitals
Manufacturer Innokin
Tank Style Tank not included
Method N/A
Threading Innokin
Battery Style Li-Ion 3800mAh
Warranty 90 Day
Replacement Parts Coming Soon
MSRP 79.95
 
 

MVP 3.0

The Innokin iTaste MVP 3.0 is a huge advancement over its predecessor, the MVP 2.0.

Battery life has been increased, short circuit/atomizer protection and sub-ohm options have been added, as well as the standard variable voltage and variable wattage.

Using Your iTaste MVP 3.0

A: Innokin has expanded the functions of the MVP, providing more options but also making iTaste MVP 3.0 extremely simple to use. We highly recommend referring to the full instructions located on the ‘User Guide’ tab, but here is a quick rundown on using the iTaste MVP 3.0:

Charge the iTaste MVP 3.0 – THe 3800mAh battery is quite large so this could take a few hours the first time, but subsequent charges should not take longer than 60-90 minutes.

The MVP3.0 battery has a tri-color LED on the top that indicates battery life remaining:

Green = Almost fully Charged. When the iTaste MVP3.0 is fully recharged the top LED light will power off
Yellow = Half Power
Red = Low Power Charge the MVP3.0.

Attach Atomizer The iTaste MVP 3.0 does not include an atomizer tank; you must provide your own. The MVP accepts tanks with 510 threading and also includes an eGo-style adapter.

Power up and draw – Once you have set your preferred wattage and voltage, simply press the power button three times to unlock, then once more to activate the atomizer.

A: The iTaste MVP 3.0 heats up in roughly 1 second.
A:Press and hold the “+” button along with the power button for one second to enter variable wattage mode. While in VW mode, press the + or – buttons once and then press again increase or decrease the wattage. MVP can be adjusted from 6.0 to 30 watts in .5watt increments. Press the power button to lock the setting.

To enter variable voltage(VV) mode, press and hold the Press and hold the “-” button along with the power button for one second to enter variable voltage mode. While in VV mode, press the + or – buttons once and then press again increase or decrease the wattage. MVP can be adjusted from 3.0 to 9.0 watts in .1 volt increments. Press the power button to lock the setting.

A: Since the MVP does such a strong job of short circuit/atomizer protection, it protects the iTaste MVP3.0 Advanced Personal Vaporizer against shorted atomizers and will stop the unit from functioning in unsafe conditions. The only remaining factor in vapor quality would be your choice of liquid.
A: The iTaste MVP 3.0 was designed solely for liquids. Using concentrates or aromatic blends with the iTaste MVP 3.0’s will likely ruin your device and void your warranty.
A: Yes, the charger is rated for 100-240V. You may need an outlet adapter for locations outside of North America.
A: Adjust your voltage and wattage as needed to tweak the vapor quality.
A: The iTaste MVP 3.0 is made from extruded and billet aluminum, with high quality li-ion batteries.
A: The iTaste MVP 3.0 does not come with an atomizer. It is a box mod battery only.
A: Short Circuit/Atomizer Protection protects the iTaste MVP3.0 Advanced Personal Vaporizer against shorted atomizers and will stop the unit from functioning in unsafe conditions.

The iTaste MVP3.0 features automatic real-time atomizer Ohms detection. If the resistance of the atomizer is lower than 0.4 the Ohms bar will blink and the MVP3 will not power on.

A: 3/4 full should be fine, completely full isn’t recommended.
A: Yes, after 15 seconds of use, the iTaste MVP 3.0 will power off.

There is also a safety on the power switch, clicking it three times turns off the power button, and repeating this turns the button back on. This is great if you have the iTaste MVP 3.0 in your purse, or pocket, as it prevents it from going off accidentally and wasting your battery or worse.

As a general safety rule, do not leave the iTaste MVP 3.0 unattended while powered on.

A: The iTaste MVP 3.0 uses a unique ceramic screen that you shouldn’t ever need to replace, outside of losing it. To clean, use a paper clip to clear the holes; soak in isopropyl alcohol, but if you feel that you do, please contact us and our expert agents will help you find a solution.
A: The battery is 3800mAh Li-Ion and is not replaceable.
A: The charger that comes with the iTaste MVP 3.0 is USB, and will work in any powered USB port in the world.
A: When the iTaste MVP 3.0 Battery is in need of a charge, the LED indicator will turn red continue blinking when the battery capacity is lower than 3.3V and the iTaste MVP3.0 Advanced Personal Vaporizer will automatically power off.

At this time, remove the atomizer and connect the iTaste MVP 3.0 Battery to the iTaste MVP 3.0 wired USB charger (at the base of the iTaste MVP 3.0).

A: According to Innokin, allow 3-4 hours charging time for the first 3-4 cycles. Then, it should only take roughly one hour to charge.

Cleaning & Maintenance

A: Avoid extreme temps as they may accelerate battery depletion. Never bring your iTaste MVP 3.0 near water.

The draw stem can be cleaned with the brush, or soaked in isopropyl alcohol until the buildup dissolves.

A: Check your heating chamber as often as possible, and clean as needed.
A: We don’t recommend any liquids coming near or in contact with the iTaste MVP 3.0.

If you need to clean the outside of the iTaste MVP 3.0, use a warm barely damp cloth. If the iTaste MVP 3.0 gets wet in any way, allow to dry in the sun or a warm dry area until COMPLETELY DRY. Attempting to use the iTaste MVP 3.0 if wet will cause serious damage to the unit.

Ordering – Returns – Warranty

A: 90 Days
A: Not at this time.
A: Innokin is handling all of the warranty requests and service for the iTaste MVP 3.0. Full warranty and contact information for Innokin is available on the warranty tab.
A: Your warranty period begins with your date of purchase. Contact VapeWorld for more information about warranty registration. If you need proof of purchase information for your VapeWorld purchased iTaste MVP 3.0, please contact us.

If you have any other questions about the iTaste MVP 3.0 vaporizer, please contact us!

Product Dimensions 4in x .875in x .875in (10.16cm x 2.2cm x 2.2cm)
Package Dimensions 5.5in x 3.25in x 1.25in (14cm x 8.3cm x 3.175cm)
Product Weight .45bs (.2kg)
Package Weight .75lbs (.34kg)
Vapor Path N / A
Chamber Material N / A
Charging Options USB
Battery Capacity 3800 mAh Li-Ion
Voltage 3.0v to 9.0v
Auto-Off? Yes, 15 Seconds
Safety Power Switch Yes, 3-Click
Heating Element N / A
Warm-Up Time ~1 Second
Country of Manufacture China
Warranty 90 Days

Included with Purchase:

Innokin iTaste MVP 3.0 30W
USB Charger Cable
Ego Adapter
User Manual

  • Innokin iTaste MVP 3.0 30W
  • USB Charger Cable
  • Ego Adapter
  • User Manual

MVP 3.0 User Guides

*Adobe Reader or PDF viewer Required

Getting the Most Out of Your iTaste MVP 3.0

  • Never leave a iTaste MVP 3.0 in a hot or frozen car, this will deplete the battery life exponentially.
  • Allowing the iTaste MVP 3.0 to freeze can damage the atomizer. Avoid temperatures below 40 degrees.

MVP 3.0 Maintenance

If any buildup has made it onto the body of the iTaste MVP 3.0, wipe off with a warm damp cloth.

iTaste MVP 3.0 Colors

MVP 3.0 Colors

Need Assistance with your iTaste MVP 3.0?

Try these Solutions to common issues:

A: A few things could be causing this. Is the 3-click safety lock in place? Try clicking your iTaste MVP 3.0 button three times and see if anything happens.

Are you getting any light at all from the button or the LED on the top? If not, make sure that the iTaste is charged properly.

If you have charged the iTaste MVP 3.0 fully, unlocked the power button and are still getting no vapors, feel for any warmth at all, and if you feel nothing, please contact us.

A: Make sure your iTaste MVP 3.0 is fully charged, and the atomizer coil is screwed on fully and loaded properly (not overloaded).
A: The atomizers will last 4-5 weeks with normal use, although your experience will vary. Replace your atomizer when you feel it needs it. A change in aroma will be your first indicator the atomizer has died.

If these troubleshooting tips don’t work, please contact us.

innokin-logo

MVP 3.0 Accessories coming soon!

Innokin 90 Day Limited Warranty

Innokin is handling all of the warranty requests and service for the MVP.

To be eligible for service under this warranty you MUST return the warranty registration card, the dated receipt or purchase order, or other proof of purchase indicating the date purchased, within three months 90 days of purchasing your genuine Innokin product. Send these items to:

How Do You Get Service? To be eligible for service under this warranty you MUST return the warranty registration card, the dated receipt or purchase order, or other proof of purchase indicating the date purchased, within three months 90 days of purchasing your genuine Innokin product. Send these items to:

After Sales Service Center (California)
17128 Colima Rd #380 Hacienda Heights‎ CA‎ 91745 United States
E-mail: Customerservice@innokin.com

After Sales Service Center ( North Carolina )
8006 Market St Wilmington, NC 28411
Phone : 910-821-0060
Phone : 1-888-681-9235
E-Mail : Innokinreturns@ElectraVapor.com

We will inspect your device to verify that it is a genuine Innokin product, and if so, repair or replace it if it is received within 90 days of the date of purchase.

*IMPORTANT: WARRANTIES NON-TRANSFERABLE. ITEMS PURCHASED ONLINE FROM E-BAY, AMAZON, CRAIGSLIST, ETC. ARE CONSIDERED 2ND HAND AND WARRANTIES NULL AND VOID!

Any other questions? Let us know.
If you need more information about Innokins’s Warranty, please contact us

Leave a Reply