VaporCone

 VaporCone
Elite 2 – Vape Vitals
Manufacturer VaporCone
Tank Style Skillet
Method Direct Draw
Threading 510
Battery Li-Ion 650mAh
Warranty 30 Day
Replacement Coils Yes
MSRP 59.95
 

vaporcone-sl-vapeworld-kb-main-image

Brief Overview

VaporCone Elite 2 is a portable vaporizer recommended for use with solid concentrates. The Elite 2 features an improved battery system in a package that includes 2 VaporCone XL attachments. The attachments allow you to load two and a half times more material than its little brother, the VaporCone Discreet. Utilize the 510 threading for cross compatibility with your other devices.

See User Guides below for full usage information.

Using Your Elite 2

A: We definitely recommend reading the full instructions located on the ‘User Guide’ tab, but here is a quick rundown on Elite 2 Usage:

Charge the Elite 2 – This could take a few hours the first time, but subsequent charges should not take longer than 46-60 minutes.

Load the Elite 2 – This is easily done by removing the mouthpiece and using a loading tool to apply your solid concentrates on top of the atomizer coil while making effort to not touch the coil. Do not load too much, more than a sessions worth is definitely too much. Replace mouthpiece.

Power up and Draw – If the switch on the Elite 2 is locked, unlock by pressing the button five times. This enables the power switch and the Elite 2 is ready to use. Press the button to begin vaporization and use until you have had your fill, or until the ten-second shut

off turns the atomizer off.

A: 1 Second
A: When using solid concentrates, its vital that you only use that which melts cleanly and leaves no particulate behind. This particulate can overheat when in contact with the atomizer coil, shortening its lifespan.

Varying your draw rate slightly will allow you to adjust the density of the vapor output, a slower draw rate will create thicker vapor, and a quicker draw rate will create slightly thinner vapor.

The air intake on the Elite 2 is controlled, so there is only a small amount of adjustment you can make to your draw rate.

A: The Elite 2 was designed mainly for solid concentrates. Avoid using aromatic blends and liquids that do not solidify at room temperatures.
A: Yes. The AC adapter for the USB charging cable is rated from 100v to 240v, however you may need an outlet adapter for locations outside of North America.

USB Charging is also available.

A: When using solid concentrates its vital that you only use that which melts cleanly and leaves no particulate behind.

Varying your draw rate slightly will allow you to adjust the density of the vapor output, slower draw rates will create thicker vapors, and quicker draw rates will create slightly thinner vapors.

The air intake on the Elite 2 is controlled, so there is only a small amount of adjustment you can make to your draw rate.

A: The atomizer coil is NiChrome, the crucible is ceramic, and the mouthpiece is silicone.
A: Nichrome. Nichrome is a non-magnetic alloy of nickel, chromium, and often iron, usually used as a resistance wire in applications from atomizer coils to toasters and beyond.
A: With solid concentrates, we don’t recommend loading more than one sessions worth.
A: The Elite will shut off after ten seconds of use. As a general safety rule, do not leave the Elite 2 unattended while powered on.
A: The atomizer coil is not rebuildable, so when it eventually expires, replace with a new one.

Atomizers will last 4-5 weeks with normal use, your experience may vary.

A: There are no screens in the Elite 2.
A: Li-Ion, 650mAh with 510 threading.
A: The AC adapter for the USB charging cable is rated from 100v to 240v, however you may need an outlet adapter for locations outside of North America.

USB Charging is also available.

Cleaning & Maintenance

A: Always allow the Elite 2 to cool COMPLETELY before cleaning, 30 minutes should be sufficient.

Any solid concentrate that has collected on the outside of the Elite 2 can be cleaned with a warm, damp washcloth.

The mouthpiece and top section of the body that unscrews will incur the most buildup, especially with the use of solid concentrates. This can be cleaned by soaking in isopropyl alcohol.

Always make sure your vaporizer is COMPLETELY dry before plugging it back in.

Do not attempt any internal or external repairs to your unit as doing so may cause fatal injury – or worse – void your warranty! (Please contact us if you feel something is wrong with your vaporizer.)

A: Inspect your Elite 2 each time you use it. Make sure the coil is working perfectly, and that no debris or buildup is clogging the holes. Check the inside of the mouthpiece often, it will get dirty the fastest.

Atomizers will last 4-5 weeks with normal use. Replace as needed.

A: Do not use liquids to clean the atomizer coil.
A: The mouthpiece, and the top metal section that unscrews. Check these often
A: The atomizer is replaceable. Atomizers will last 4-5 weeks with normal use, however your experience will vary.

Ordering – Returns – Warranty

A: 30 Days.
A: Not at this time.
A: VaporCone is handling all warranty requests and service for the Elite 2. If you are having a warranty issue with your Elite 2, please contact them directly at: (855) 360-3227 or at
Suppport@VaporCone.com.
A: Your warranty begins on your purchase date, if you have any questions about your Elite 2 warranty, please contact us.

If you have any other questions about the Elite 2 vaporizer, please contact us!

Product Dimensions 5.187in x 0.5in x 0.5in (14.2cm x 1.27cm x 1.27cm)
Package Dimensions 6in x 2.75in x 1.75in (13.2cm x 7cm x 4.45cm)
Product Weight 0.09 lbs (.04kg)
Package Weight .3lbs (.136kg)
SKillet Material Ceramic Crucible/Nichrome Coil
Tank Capacity One Session
Charging Options USB/110v/240v
Battery Type 510
Replaceable Battery Yes
Battery Capacity Li-Ion 650 mAh
Auto-Off? Yes, 10 Second
Safety Power Switch Yes, 5-Click
Heating Element NiChrome
Warm-Up Time 1 Seconds
Vapor Path Steel, Silicon
Country of Manufacture China
Warranty 30 Days
  • VaporCone Elite 2 4.2v 650mah 510 Threading
  • 2x VaporCone XL 2 Attachments
  • Mouthpiece
  • USB Cable Charger
  • Carrying Case
  • User Manual

Elite 2 User Guides

  • Coming Soon!
*Adobe Reader or PDF viewer Required

Getting the Most Out of Your Elite 2

  • Keep your Elite 2 as clean as possible to ensure peak performance.
  • When using with solid concentrates, only load as much as one session will use. Overloading will effect performance.

Maintenance

The top metal cap and mouthpiece will definitely need occasional soaking in isopropyl alcohol, inspect them often and keep them clean.

If any concentrate makes it on the outside of the Elite 2, it can be removed with a warm damp cloth.

Need Assistance with your Elite 2?

Try these Solutions to common issues:

A: Ensure that your battery is fully charged, and that the safety lock is not engaged by clicking the power button five times. You should see the light on the button blinking, if not plug the battery in and fully charge it.

If you have a fully charged battery that isn’t locked, and you still have no heating, ensure that the connection contacts are clean, and that the heating chamber is fully screwed onto the battery. If you still have no heating, its possible that the atomizer has failed. Replace as needed.

If these troubleshooting tips don’t work, please contact us.

VaporConeAs an Authorized Dealer of VaporCone Products, we offer a replacement coils for the Elite 2 and Discreet vaporizers.

VaporCone Elite 2 30 Day Warranty

VaporCone is handling all of the warranty requests and service for the Elite 2.

*IMPORTANT: WARRANTIES NON-TRANSFERABLE. ITEMS PURCHASED ONLINE FROM E-BAY, AMAZON, CRAIGSLIST, ETC. ARE CONSIDERED 2ND HAND AND WARRANTIES NULL AND VOID!
If you are having

a warranty issue with your Elite 2, please contact them directly at: (855) 360-3227 or at Suppport@VaporCone.com”

If you need more information about Elite 2’s Warranty, please contact us

Tagged:

Leave a Reply