The Bullet-2-Go by Atmos is one of the smallest portable vaporizers available. Featuring a wickless ceramic heater, the Bullet-2-Go offers instant flavorful vapor at the push of a button, making it an ideal choice for portable solid concentrate or aromatic blend use on-the-go.
See User Guides below for full usage information.
Using Your Bullet-2-Go
Charge the Bullet-2-Go – This could take a few hours the first time, but subsequent charges should not take longer than 46-60 minutes.
Load the Bullet-2-Go – This is easily done by removing the mouthpiece, and applying your solid concentrates on top of the atomizer coil, or insert a glass screen and load your aromatic blends on top. Do not load too much, more than a sessions worth is definitely too much. Replace mouthpiece.
Power up and Draw – If the switch on the Bullet-2-Go is locked, unlock by pressing the button 3 times. This enables the power switch and the Bullet-2-Go is ready to use. Press the button to begin vaporization. Use until you have had your fill, or the ten-second shut off turns the atomizer off.
USB Charging is also available.
Varying your draw rate slightly will allow you to adjust the density of the vapor output, slower draws will create thicker vapors, and quicker draws will create slightly thinner vapors.
The air intake on the Bullet-2-Go is controlled, so there is only a small amount of adjustment you can make to your draw rate.
With aromatic blends, you can load as much as you can fit in the chamber, as long as you don’t load it too tightly.
If, after the first few times you stir your blends, you find that the blend seems to be browning evenly, you are loading it properly, and may not need to stir.
If you are finding that your blend is browning unevenly, trying loading it *slightly* more loosely.
Atomizers will last 4-5 weeks with normal use, your experience may vary.
Cleaning & Maintenance
Use the loading tool to clean inside the crucible, but be EXTREMELY careful not to make contact with the atomizer coil, it can be damaged very easily.
Any solid concentrate that has collected on the outside of the Bullet-2-Go can be cleaned with a warm, damp washcloth.
The mouthpiece and top section of the body that unscrews will incur the most buildup, especially with the use of solid concentrates. This can be cleaned by soaking in isopropyl alcohol.
Always make sure your vaporizer is COMPLETELY dry before plugging it back in to charge.
Do not attempt any internal or external repairs to your unit as doing so may cause fatal injury – or worse – void your warranty! (Please contact us if you feel something is wrong with your vaporizer.)
Atomizers will last 4-5 weeks with normal use. Replace as needed.
Ordering – Returns – Warranty
If you have any other questions about the Bullet-2-Go vaporizer, please contact us!
|Product Dimensions||4.69in x .375in x 0.375in (11.9cm x .95cm x .95cm)|
|Package Dimensions||5.5in x 2in x .85in (14.0cm x 5.10cm x 2.16cm)|
|Product Weight||0.03 lbs (0.01kg)|
|Package Weight||0.2lbs (0.09kg)|
|Heater Material||Ceramic Crucible/Nichrome Coil|
|Tank Capacity||One Session|
|Battery Capacity||Li-Ion 350 mAh|
|Auto-Off?||Yes, 10 Second|
|Safety Power Switch||Yes, 3-Click|
|Warm-Up Time||1 Seconds||Vapor Path||Steel, Silicon|
|Country of Manufacture||China|
Included with Purchase:
- Atmos Bullet-2-Go
- USB Charger
- User Manual
Bullet-2-Go User Guides
*Adobe Reader or PDF viewer Required
Getting the Most Out of Your Bullet-2-Go
- Keep your Bullet-2-Go as clean as possible to ensure peak performance.
- When using with aromatic blends, you will definitely want to use a glass screen, which keeps the blends from making contact with the atomizer coil. Contact with the coil will lead to instant overheating.
- When using with solid concentrates, only load as much as one session will use. Overloading will effect performance.
- Ensure safety lock is not engaged by clicking the power button three times. You should see the light on the button blinking, if not plug the battery in and fully charge it.
The top metal cap and mouthpiece will definitely need occasional soaking in isopropyl alcohol, inspect them often and keep them clean.
If any concentrate makes it on the outside of the Bullet-2-Go, it can be removed with a warm damp cloth.
Need Assistance with your Bullet-2-Go ?
Try these Solutions to common issues:
Are you getting any light at all from the button or the bottom? If not, make sure that its charged properly. This seems obvious, until you realize the power strip you were plugged into wasn’t turned on. Or…the USB port you were plugged into wasn’t actually a powered USB port. Or…there are many reasons to think your vaporizer is charging…when it isn’t. It happens all the time.
If you have charged it fully and unlocked the power button, and are still getting no vapors, remove the mouthpiece, press the button, and listen to see if there is any activity at all? if nothing happens, its possible your atomizer had expired.
Atomizers will last 4-5 weeks with normal use, however your experience may vary.
If these troubleshooting tips don’t work, please contact us.
Vape World carries atomizers and clearomizers that are compatible with the threading on the Bullet-2-Go .
Atmos Bullet-2-Go 5 Year Warranty
Vape World is handling all of the warranty requests and service for the Bullet-2-Go.
*IMPORTANT: WARRANTIES NON-TRANSFERABLE. ITEMS PURCHASED ONLINE FROM E-BAY, AMAZON, CRAIGSLIST, ETC. ARE CONSIDERED 2ND HAND AND WARRANTIES NULL AND VOID!
If you need more information about Bullet-2-Go ‘s Warranty, please contact us